OLED Display - 128x64 0.96in Monochrome
OLED Display - 128x64 0.96in Monochrome - Blue - Pinout B is backordered and will ship as soon as it is back in stock.
Delivery
Delivery
Ships Same Day if Ordered Before Noon Pacific Time
This OLED display produces a very crisp image. Since this is an OLED display it doesn't need a backlight which allows for deep black levels and therefore a very high contrast and it has a much wider viewing angle compared to LCD displays.
Addicore offers this OLED display in 3 single colors; blue, white, and yellow, as well as a dual color version where the top 1/3 is yellow and the rest is blue.
This display is 124 by 64 pixels in size, which allows you to fit quite a lot of text or graphics for the physical size of the display.
This module allows you to control the OLED display over I2C.
This module uses the SSD1306 OLED driver, which includes an internal switch-cap charge pump to create the higher voltage necessary to drive the OLEDs in the display.
There are multiple different styles and sizes of fonts available in the library that we have provided a link to below in the resources section.
- 1 — Monochrome 128x64 0.96" I2C OLED Display Module
OLED Model | UG-2864HLBEG01 |
OLED Driver | SSD1306 |
I2C Address | |
Default | 0x78 |
Solder Selectable | 0x7A |
Supply Voltage | 3.3V - 6V |
Logic Level Voltage | 3.3V - 4.3V |
Diagonal Screen Size | 24.384mm (0.96") |
Active Area Size | 21.744mm x 10.864mm |
Pixel Resolution | 128 x 64 |
Pixel Pitch | 0.17mm x 0.17mm |
Pixel Size | 0.154mm x 0.154mm |
Color Depth | Monochrome |
Viewing Angle | 160° |
Dark Room Contrast | >10,000:1 |
Display Mode | Passive Matrix |
Drive Duty | 1/64 |
Dimensions: | ||||
Blue - Pinout B | White - Pinout B | Yellow - Pinout B | Yellow/Blue - Pinout B | |
Length | 26.0mm (1.023") | 28.0mm (1.102") | 24.8mm (0.976") | 28.0mm (1.102") |
Width | 25.3mm (0.996") | 27.5mm (1.082") | 24.8mm (0.976") | 27.4mm (1.078") |
- OLED Display Example Sketch - Addicore's Github
- OLED Display Datasheet
- SSD1306 OLED Driver Datasheet
- SSD1306 and Charge Pump Application Note
- U8G2 Library for Arduino by Olikraus
- U8G2 Library Wiki including reference manual and font reference