Nano 3.0 - ATmega328P
From
$7.99
Unit price /
Unavailable
This is an ATmega328P based Nano 3.0 board. It is similar to the Arduino UNO but in a much smaller and breadboard compatible board.
The board has a USB jack (type selectable above) to connect it to your computer and has an on-board 5V regulator.
Product Contents:
- 1 — Nano 3.0 board with ATmega328P
- 2 — 1x15 male header
- 1 — 2x3 male header (ICSP header)
Specifications:
- Breadboard friendly with pin spacing of 2.54mm (0.1")
- On-board LEDs to indicate power, TX, RX, and D13
- A manual reset button is included on the board
| Microcontroller | ATmega328P |
| Operating Voltage | 5V |
| Input Supply Voltage | USB or 6-12V on VIN |
| Digital I/O Pins | 20 (including Tx, Rx, D2-D13, A0-A5) |
| Analog Input Pins | 8 total (A0-A5 can also be used as digital I/O pins) |
| I/O Pin DC Current Capability | 40mA |
| Flash Memory | 32kB |
| SRAM | 2kB |
| EEPROM | 1kB |
| Clock Speed | 16MHz |
| SRAM | 2kB |
| Dimensions (Excluding Pins) | |
| Length | 44.8mm (1.76") |
| Width | 17.6mm (0.7") |