USB to Serial Converter Module (CP2102)
This is a handly USB to serial (UART) converter module. You can use it to communicate with ESP8266 modules, ATmega328 ICs, Arduino's, sensors, and other devices that use serial (UART) to communicate.
A great feature of these modules is that Windows machines will not require you to do anything to install any drivers. Just plug this module into your computer using a micro usb cable and start using it. Mac users will benefit from the same ease of use, but if necessary we have provided download links in the resources section below for Windows, Mac, and Linux drivers.
We have tested these modules with our ESP8266 modules, Pro Mini boards, and HC-06 Bluetooth modules and these modules work great with them.
- 1 — CP2102 USB to Serial Module
- 1 — Six pin (1x6) male header
- Micro USB connector
- Baud rates: 300 bps to 1 Mbps
- +5V pin maximum output: 500mA (when module is connected to a USB 2.0 port)
- Internal 3.3V regulator provides 3.3V at the 3V3 pin
- 3V3 pin maximum output: 100ma
- On board resettable fuse protects your computer's USB port
- Red LEDs indicate Tx, Rx, and connection to a computer
- DTR pin allows you to easily upload your program to devices such as an ATmega328P Pro Mini
- 576 Byte receive buffer
- 640 byte transmit buffer
- Data formats supported:
- Data bits: 5, 6, 7, and 8
- Stop bits: 1, 1.5, and 2
- Parity: odd, even, mark, space, no parity
- Board Dimensions: 20.2mm (0.796") long x 15.2mm (0.599") wide
- Weight: 1.73g (0.062oz)
